Pyroelectric IR Sensor RE200GE Upgraded NiCera RE200BE Motion Sensor

Description

Pyroelectric IR Sensor Model RE200GE. This sensor is based on the specs of the NiCera replacement for their venerable RE200BE Sensor, the new and improved RE200GE. These Sensors are a great upgrade for Trail Cameras, Security Cameras, etc. Starting a new project that calls for the RE200BE? Then use this to exceed current specs with more reliability and less false triggers.
Electrical characteristics (at 25 (+/-) degC)
1) Circuit configuration   : Three-terminal sensor with source follower
2) Operating voltage      : 1 ~ 15 V dc (Rs: 470kohm)
3) Source voltage           : 0.3 ~ 1.5 V (Vd: 5V, Rs: 470kohm)
4) Signal output         : Min.  2.5 Vp-p   (Typ. 4.0 Vp-p)
Signal output is measured at chopper frequency of 1 Hz when connected to the amplifier of gain 72.5 dB (at 1 Hz) and submitted to the emission of Infrared energy of 13 microW/cm2 from 420 K Black Body.
5) Noise output          : Max.  250 mVp-p  (Typ. 90 mVp-p)
Noise output shall be measured for 20 seconds when connected to the amplifier of gain 72.5 dB (at 1 Hz) and shut out from Infrared energy.
6) Balance output        : Max. 15 %
〔 Bo / |SA+SB| 〕≦ 0.15
Bo : Balance output
SA : Signal output on Element A
SB : Signal output on Element B
Balance output is measured at chopper frequency of 1 Hz when connected to the amplifier of gain 72.5 dB (at 1 Hz) and submitted to the emission of Infrared energy of 13 microW/cm2 from 420 K Black Body.
7) Frequency response    : 0.3 Hz to 3.0 Hz / (+/-) 10 dB
Optical characteristics
1) Field of view           : 138° from center of element on axis X
: 125° from center of element on axis Y
: See Figure 1-a
2) Filter substrate         : Silicon
3) Cut on (5 %T ABS)      : 5.0 (+/-) 0.5 micron
4) Transmission          : ≧ 70 % average 7 to 14 micron
Environmental requirements
1) Operating temperature : -30 degC to +70 degC
2) Storage temperature   : -40 degC to +80 degC
3) Relative humidity      : The sensor shall operate without increase in noise output when exposed to 90 ~ 95 % RH at 30 degC continuously.
4) Hermetic seal         : The sensor shall be sealed to withstand a vacuum of 21.28 kPa.
RoHS compliance
This product conforms to the RoHS Directive in force at the date of issuance of this Specification Sheet.
Manf in South Korea for Hughes Computer Services, the RE200GE supersedes the RE200BE in both stability and fewer false triggers. Condition is "New" OEM. Free Shipping with USPS First Class to Lower 48.