Extech Ground Resistance Clamp-on Meter #382356

Description

Like New - Used for 1 job.
RESISTANCE TESTER, CLAMP-ON GROUND
General Specifications
Resistance Test Frequency
1.667KHz (15mV rms approx.)
Max Conductor size
0.9” (23mm)
Display
4-digit (9999 count) display
Sampling rate
0.4 seconds
Power supply
One 9V battery
Power consumption
40mA
Temp. Coefficient
0.15 times the specified accuracy per degree centigrade (from 39 to 64°F (4 to 18°C) and 82 to 122°F (28 to 50°C))
Current Overload Protected
to 100A Continuous, 200A for less than 60 seconds (50/60Hz)
Continuity check
Audible tone if reading is less than approx. 40 Ω
Range selection
Automatic ranging
Safety
Meets the requirements for IEC1010-1 Category III 300V and Category II 600 V
Operating conditions
4 to 122°F (-20 to 50°C) with < 85% RH
Storage conditions
-20 to 140°F (-28 to 60°C) with < 75% RH
Dimensions
10.2 x 4.4 x 1.9” (258 x 110 x 47mm)
Weight
24.7oz (700g)
Accessories
Resistance check plate, 9V battery, carrying case