ETCR2000+ Clamp On Ground Earth Resistance Tester Meter RS232-Brand hot

Description

ETCR 2000+ Clamp Earth Resistance Tester
NOTE
：
we don't ship the item to PO BOX address
，
and we only ship the item to English address, so please leave us your physical English address when you pay
Introduction：
ETCR Clamp Earth Resistance Tester is widely applied in ground resistance measurement, loop resistance measurement in fields such as electric power, telecommunications, meteorology, oil field, architecture and industrial electrical equipment, etc. When measuring ground system with loop, there is no need to disconnect the ground wire without auxiliary electrode, which means safer and faster. ETCR Clamp Earth Resistance Tester can measure the ground fault which can not be measured by traditional method, can apply in the occasion where traditional methods are unworkable; ETCR Clamp Earth Resistance Tester measures the integrated value of ground resistance and resistance lead.
Technical Specifications
Function
Ground resistance test, Loop resistance test
Power Supply
6VDC 4 PCS of AA Alkaline batteries
Resistance Range
0.01-1200Ω
Resistance Resolution
0.001Ω
Highest Resistance Accuracy
±1%±0.01Ω
Data memory
99 Sets
Alarm Threshold Setting Range
Resistance: 1-199Ω
Alarm Sound and Light
“Beep-beep-beep” alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold.
Interference Signal Recognition
“Beep-beep-beep” tone, NOISE symbol blinking
Working Temperature and Humidity
-20℃-55℃；20％RH-90％RH
LCD Screen
4 Digits LCD display, Screen L×W: 47mm×28.5mm
Clamp Size
65mm×32mm
Clamp Opening Extent
32mm
Tester Weight
1160g (With batteries)
Clamp Dimension
L×W×T: 285mm×85mm×56mm
Protection Level
Dual Insulation
Structural Feature
Clamp CT
Shifting
Automatic shifting
External magnetic field
＜40A/m
External electrical field
＜1V/m
Single measurement time
0.5 second
Resistance measurement frequency
＞1KHz
Measured current frequency
50/60Hz Automatic measurement
Low Battery Indication
Low battery symbol displays when battery is lower then 5.3V
Memory Full Indication
MEM symbol blinks when all 99 sets memory is full
Over Range Indication
Out of range indication “OLΩ”, “L0.01” or “OL A”
Auto Power-off
5 minutes after Boot up
Power Consumption
Max 50mA either in booting up or normally working, Continuously working for 30 hours
RS232 Interface (Optional)
The data stored in the meter are uploaded to the computer through RS232 interface and data wire, Then generate report files
Safety Provisions
IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)
Accessories
Meter: 1 piece, Test ring: 1 Piece, Meter Suitcase: 1 Piece
Shipping Policy
We will send out the item within 2-3 days through DHL/EMS/FEDEX /UPS/SPEEDPAK/CHINA POST to the below countries:
Belgium, Netherlands, Luxembourg, Italy, Germany, France, United Kingdom, San Marino;
Austria ,Denmark ,Finland ,Greece ,Ireland ,GUERNSEY ,JERSEY ,Norway ,
Portugal , spain , Sweden , Switzerland;
Bulgaria,Cyprus,Estonia,Latvia,Lithuania,Malta,slovakia,slovenia;
Czech Republic, Hungary, Poland, Romania,.
Australia ,New Zealand ,Korea South, Malaysia, Thailand, Philippines ,Singapore , Bruniei ,Taiwan , Macau, Indonesia,
USA, Canada
We will send tracking number to your eBay email within 1 day after sending out your item
We will mark the item at the very low value, so that you do not need to pay for the tax or pay a little tax.
Payment policy:
We accept Paypal only.
Payments must be finished within 5 working days after bid, otherwise, Unpaid Item dispute will be reported to eBay.
Refund &Return policy
We take all the responsibility during delivery. If you do not receive your item, we will refund you the full money or send you a new item according to your request.
We can accept the return item within 60 days after the buyer receives it. Once we receive the return item, then we will refund you full money.
Feedback Policy
We will very appreciate you give us positive feedback
ASAP.  If the item you got in any problem, PLS don’t hesitates to contact us.  We will do our best to help solve the problem
Powered by SoldEazy