Earth Resistance Tester Digital Clamp Meter Industrial Electrical Equipment

Description

Earth Resistance Tester Digital Clamp Meter Industrial Electrical Equipment
Product Characteristics:
Clamp size: 65×32 (mm),
Resistance Range: 0.01~200(Ω),
Resistance resolution: 0.001Ω,
Data memory: 99 sets,
Alarm setting: 1~199(Ω), Buzzer alarm.
Optional function of RS232 interface data upload
Introduction
▲
Clamp Earth Resistance Tester is widely applied in ground resistance measurement, loop resistance measurement in fields such as electric power, telecommunications, meteorology, oil field, architecture and industrial electrical equipment, etc. When measuring ground system with loop, there is no need to disconnect the ground wire without auxiliary electrode, which means safer and faster.
▲
Clamp Earth Resistance Tester can measure the ground fault which can not be measured by traditional method, can apply in the occasion where traditional methods are unworkable;  Clamp Earth Resistance Tester measures the integrated value of ground resistance and resistance lead.
Technical Specifications
▲
Function
：
Ground resistance test, Loop resistance test
▲
Power Supply
：
6VDC 4 PCS of AA Alkaline batteries
（
battery not included
）
▲
Resistance Range
：
0.01-200Ω
▲
Resistance Resolution
：
0.001Ω
▲
Highest Resistance Accuracy
：±
1%±0.01Ω
▲
Data memory
：
99 Sets
▲
AlarmThreshold Setting Range
：
Resistance: 1-199Ω
▲
Alarm Sound and Light
：
"Beep-beep-beep” alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold.
▲
Interference Signal Recognition
：
"Beep-beep-beep” tone, NOISE symbol blinking
▲
Working Temperature and Humidity
：
-20°C-55°C; 20%RH-90%RH
▲
LCD Screen
：
4 Digits LCD display, Screen L×W: 47mm×28.5mm
▲
Clamp Size
：
65mm×32mm
▲
Clamp Opening Extent
：
32mm
▲
Tester Weight
：
1160g (With batteries)
▲
Clamp Dimension: L×W×T: 285mm×85mm×56mm
▲
Protection Level
：
Dual Insulation
▲
Structural Feature
：
ClampCT
▲
Shifting
：
Automatic shifting
▲
External magnetic field
：
<40A/m
▲
External electrical field
：
<1V/m
▲
Single measurement time
：
0.5 second
▲
Resistance measurement frequency
：
>1KHz
▲
Measured current frequency
：
50/60Hz Automatic measurement
▲
Low Battery Indication
：
Low battery symbol displays when battery is lower then 5.3V
▲
Memory Full Indication
：
MEMsymbol blinks when all 99 sets memory is full
▲
Over Range Indication
：
Out of range indication “OLΩ”, "L0.01”or “OL A”
▲
Auto Power-off
：
5 minutes after Boot up
▲Power Consumption
：
Max 50mA either in booting up or normally working, Continuously working for 30 hours
▲
RS232 Interface (Optional)
：
The data stored in the meter are uploaded to the computer through RS232 interface and data wire, Then generate   report files
▲
Accessories
：
Meter: 1 piece, Test Ring: 1 Piece, Meter Suitcase: 1 Piece