Digital Ground Resistance Tester Meter 0.01-1200ohm Alarm Function Clamp Meter

Description

Digital Ground Resistance Tester Meter 0.01-1200ohm Alarm Function Clamp Meter
Instruction:
ETCR2100+ Clamp Earth Resistance Tester is our company's technology research and development team on technical quality of the pursuit of excellence, through continuous innovation to improve, upgrade with the old product. Its performance is mainly reflected in:
Breakthrough in self-test the boot a long time to waiting, start immediately into the test.
Breakthrough relay self-test mode, using the most advanced processing algorithms and digital integration technology.
Breakthrough the old product to heavy issues, more in line with characteristics of hand-held devices.
New design, panel operation with 6 buttons, better performance.
Increase sound and light alarm function, with "beep-beep-beep” alarm sound.
Increase the interference signal recognition indicator function, with "beep-beep-beep” indicator.
Measurement range: 0.01Ω-1200Ω
Stored data 99 Units. Lower power consumption, Maximum operating current less than 50mA.
ETCR2100+ Clamp Earth Resistance Tester is widely used in the grounding resistance measurement of the power, telecommunications, meteorology, oilfield, construction and the industrial and electrical equipment. In the measurement of a grounding system with loop, does not require breaking down the grounding down lead, and no need the auxiliary electrode. It is safe, fast and simple in use. The tester can measure ground faults which cannot be measured by traditional methods. It can be used in applications where traditional methods cannot be measured, because the ETCR series clamp grounding resistance meter measures the combined value of grounding body resistance and grounding lead resistance.
Specification:
Power Supply
6VDC 4 PCS of LR6 lkaline batteries
(not included)
Clamp Size
Φ32mm
LCD Size
4 Digits LCD display, Screen: 47mm×28.5mm
Range
0.010Ω~1200Ω
Resolution
0.001Ω
Accuracy
±1%±0.01Ω
Data Storage
99 sets
Data Upload Function
RS232 Interface (Optional)
Auto Power-off
Automatically power off after 5 minutes without any operation
Power Consumption
≤50mA
，
Continuously working for 30 hours
Working Environment
-20
℃
~55
℃；
20%rh~80%rh
Store Environment
-20
℃
~60
℃；
below 90%rh
Alarm Threshold Setting Range
Resistance
：
1~199Ω
Audible and Visible Alarm
“Beep-beep-beep” alarm sound, alarm symbol flashing, press AL key to turn on/off and setting
Interference Signal Recognition
“Beep-beep-beep” indicator, NOISE symbol blinking
Protection Level
Double insulation
Structural Feature
Clamp CT
Shift
Automatic shift
External Magnetic Field
＜
40A/m
External Electrical Field
＜
1V/m
Single Measure Time
0.5 second
Resistance Measure Frequency
＞
1KHz
Measured Current Frequency
50/60Hz Automatic
Low Battery Voltage indication
When the battery voltage is lower than 5.3V, the low battery voltage symbol is displayed
Storage Full Indication
Storage data full of 99 sets,flashed display "MEM" symbol
Over Range Indication
Over range indication “OLΩ”, “L0.01” or “OL A”
Tester Weight
1160g (With batteries)
Clamp Dimension
L×W×T
：
260mm×90mm×66mm
Packing:
Package
Outer package
Carton
Inner package
Aluminum case
Accessory
Meter
1pcs
Aluminum Case
1pcs
Test Ring
1pcs
Manual
1pcs
Certification
1pcs
Warranty Card
1pcs